U s i n g

t h e

P r o j e c t o r

 

 

 

NOTE: If you have turned Auto Source off (page 45), you may need to press the source button more than once to display an active source. The sources switch in this order: PC 1-Analog, PC 1-Digital, Video 3-Component

HDTV, Video 3-Component, Video

1S-Video, Video 2-Composite, PC 2-Component, and PC 2-Analog.

Using the Keypad and Remote Buttons

While the menus are displayed, the volume, source, and standby buttons on the keypad act as menu navigation buttons. See “Using the On-Screen Menus” on page 33 for details.

power

LED

power

menu/select

menu

 

 

 

 

zoom -

 

zoom +

source

-

 

+

 

 

 

forward

 

backward

 

 

volume -

volume +

zoom mode

data

 

 

 

keystone

standby

video

standby

- keystone +

FIGURE 24

Keypad and remote buttons

Menu/select

Press the menu/select button to open the on-screen menus. Press menu/select again (while Exit is highlighted) to close the menus. (The menus automatically close after 30 seconds if no buttons are pressed.) When you close the menus, the projector saves any changes you made. For more information about the on-screen menus, see page 33.

Source (keypad only) or Data and Video (remote only)

When you have more than one source (computer and video) con- nected to the projector, select between them by pressing the source button on the keypad or the data or video button on the remote.

30

Page 40
Image 40
BOXLIGHT 12SF manual Using the Keypad and Remote Buttons, Menu/select, Source keypad only or Data and Video remote only