S e t t i n g | u p | t h e | P r o j e c t o r |
|
|
|
|
NOTE: Lamp life will be extended if you turn the power off, then wait 1 minute while the lamp cools before unplugging the projector. The Lamp LED will light green when the lamp has cooled.
Turning Off the Projector
If you want to turn off the projector for a short period of time, press the standby button on the keypad or remote. This blanks the screen for fifteen minutes, but keeps the projector running. (You can change the amount of time the projector stays in standby mode; see page 45 for details.) After 15 minutes, the lamp goes out. To exit standby mode, press the standby button again. (It may take several seconds for the projection lamp to reach full power and project the image again.) See page 32 for details on standby mode.
To turn off the projector, press the power button (you can cancel the shutdown by pressing the power button again within 10 sec- onds). The lamp turns off and the LED blinks amber for a minute while the fans continue to run to cool the lamp. When the lamp has cooled, the LED lights green and the fans stop. Unplug the power cord to completely power off the projector.
22
