U s i n g | t h e | P r o j e c t o r |
|
|
|
Zoom mode
This activates the zoom feature. When you press this button, the zoom icon appears in the lower right corner of the screen. Press the zoom + button to zoom in on part of the image, press the zoom - button to zoom out. When the image is zoomed, you can use the up/down/left/right arrow buttons to display a different part of the zoomed image (pan the image). Press zoom mode again to exit the mode and return the image to normal size.
You can also turn Zoom mode on using the Image menu and zoom and pan the image using the keystone buttons and arrows on the keypad. See page 42 for details.
Zoom +/- (remote only)
This allows you to zoom in and out on a part of the image.
Standby 
When you press standby, the display and audio turn off and a blank screen is displayed for 15 minutes. You can change the amount of time the projector stays in standby mode; see page 45 for details. The LED lights amber while the projector is in standby.
•If you press standby again within 15 minutes, the projector returns to normal operations immediately. The LED changes from amber to green.
•If you don’t press standby again, the lamp turns off after 15 minutes. The LED blinks amber and the fans run while the pro- jector cools down, then the projector shuts off and the LED lights solid green.
Volume (keypad only) 
To increase the volume, press volume + 
. To decrease the vol- ume, press volume - 
.
32
