
Problem | Solution |
|
|
Module displays | • The line cords going into the module |
NO DATA SENT | are swapped. |
| • Your answering machine might be |
| blocking Caller ID information: |
| — Set the machine to answer after |
| 2 rings. |
| — Use the alternative answering |
| machine |
| ing to an Answering Machine” on |
| Page 14. |
| • Wait at least 2 rings before answering |
| the incoming call. |
| • If you subscribe to Call Forwarding |
| service, it might be activated. Turn off |
| your Call Forwarding. |
| (Continued on next page) |
|
|
28 |
|