•When replacing the batteries, have fresh ones on hand before you begin. If you do not install the new batteries within about 2 minutes after removing the old ones, you will lose all the information stored in the system.
1.Make sure the system is unplugged from the telephone line and AC power.
2.If you are replacing the batteries, unplug both modular line cords from the back of the system.
3.Use a Phillips screwdriver to remove the screw in the bat- tery compartment cover.
4.Slide the battery compartment
| cover in the direction of the | (illus) |
| arrow, then lift open the cover. |
|
| Caution: The battery compart- |
|
| ment cover is attached to the |
|
| system. Do not try to remove it |
|
| completely. |
|
5. | Put four fresh AAA batteries |
|
| into the compartment as indi- | (illus) |
| cated by the polarity symbols | |
| (+ and |
|
6. | Close the cover and secure it |
|
| with the screw. If you are |
|
| replacing the batteries, recon- |
|
nect the phone line, AC adapter, and the phone.
11
