INSTALLATION
Select a location for the TAD that is near a telephone jack and an AC outlet and is not in the way of normal activi- ties.
Replace the battery if LO appears while the AC adapter is properly con- nected.
INSTALLING THE BACKUP BATTERY
If the AC power fails or you unplug the TAD, a 9V backup battery (not sup- plied) saves the message groups, message counts, and the settings for the day, time, and security code. We recommend you use an alkaline bat- tery, such as Radio Shack Cat. No. 23- 553.
1.Remove the battery compartment cover on the bottom of the TAD by removing the screw on the cover’s tab, then lifting off the cover.
2.Snap the battery’s contacts firmly to the battery connector, then place the battery into the compart- ment.
Cautions:
•Before you replace the battery, be sure the supplied adapter is securely connected to an AC out- let and to the jack on the back of the TAD. Otherwise, you might lose any stored information.
•Always use a fresh battery of the required size and type.
•Dispose of the battery promptly and properly. Do not bury or burn it.
3.Replace the cover.
6
