Radio Shack TAD-1005 owner manual Recording the Memory Full Announcement

43-745.fm Page 12 Friday, August 13, 1999 2:16 PM

Recording the Memory Full Announcement

The TAD has a built-in memory full an- nouncement. When the memory be- comes full and the TAD can no longer record messages, the TAD announces “The memory is full.”

Follow these steps if you want to record your own memory full an- nouncement.

Note: The maximum recording time for the memory full announcement is pre- set to 1 minute, but you can change it to 3 minutes (see “Setting the Mes- sage Length”).

1.Press and hold OGM and 1M/3M at the same time until the answer indicator flashes.

2.Speak into the TAD in a strong voice from about 12 inches away.

3.Press ON/OFF when you finish recording the announcement. The TAD plays the current memory full announcement.

Checking the Memory Full Announcement

To listen to your own memory full an- nouncement, press OGM, then press 1M/3M immediately.

If you want to stop listening to the memory full announcement before it ends, press ON/OFF. The TAD beeps three times.

12