69
3Remove the PCI riser assembly from the server. See “To remove the PCI riser assembly” section on page 65.
4While holding the blue release lever in (A), align the holes in the PCI riser board with the retention pins on the riser assembly.
5Slide the riser board toward the left (B), then release the blue lever to lock the board in place.
6 Observe the
Removing and installing a PCI card
To remove a PCI card:
1Observe the ESD precautions and
2Remove the CPU air duct. Perform the instructions described in “To remove the CPU air duct” section on page 42.
3Remove the PCI riser assembly from the server. See “To remove the PCI riser assembly” section on page 65.
4Open the rear retention clip by pushing the blue slide upward (A) and rotating clip to the fully open position.
5When removing a full height PCI riser board, open the full length PCI card retention clip on the front of the riser assembly by rotating it 90 degrees outward (B).