Acer R720 Series manual Removing and installing the air baffles, To remove the small air baffle

45

Removing and installing the air baffles

Caution! Always operate your server with both the air baffles installed to ensure reliable and continued operation.

Your server is equipped with two air baffle, one small air baffle attached to the drive cage area and one large air baffle attached between the backplane board and the power supply. You will need to remove the smaller air baffle to perform the following procedures.

•Removing and installing the SAS mid-plane board

•Removing and installing the SAS/SATA backplane board

•Configuring the integrated SAS hardware RAID components

To remove the small air baffle:

1Observe the ESD precautions and pre-installation instructions described on page 35.

2Detach the air baffle from the chassis.