Acer R720 Series manual Parameter, Description, Option, Stay Off, Enabled, Disabled

122		4 BIOS setup
Parameter	Description	Option

Resume on AC Power Loss

Defines the mode of operation if a power loss occurs.

When set to Stay Off, the system remains off after power shutdown.

When set to Last State, the system returns to the state it was prior to the AC power loss.

When set to Reset, the system will turn on after power is restored.

Stay Off

Last State

Reset

Clear System	Deletes all events in the System Event
Event Log	Log.

FRB-2 Enable	When Enabled, the BMC (Baseboard
	Management Controller) will reset the
	system if BIOS does not complete the
	POST before the FRB-2 (Fault Resilient
	Booting) timer expires.

Enabled

Disabled

O/S Boot	Enables or disables the BIOS timer. It
Watchdog	helps to determine if the OS has
Timer	loaded successfully or followed the OS
	boot watchdog timer policy.
	The BIOS timer can only be shut off
	using the management software after
	the OS loads.

Disabled

Enabled

Console	Press Enter to access the Console
Redirection	Redirection submenu.
System	Press Enter to access the System
Information	Information submenu.