Acer R720 Series manual To install a HDD

49

4 Pull out the lever and slide the carrier from the chassis (B).

5Place the HDD carrier on a clean, static-free work surface.

6If you are replacing a hard disk, remove the four screws that secure the hard disk to the HDD carrier, then remove the disk from the HDD carrier.

Keep the screws for later HDD installation.

To install a HDD:

Note: To puchase a HDD carrier, contact your local Acer representative.

1Perform steps 1 to 4 listed on the “To remove a HDD” section on page 48.

2Remove the four screws that secure the air baffle to the HDD carrier (A).

3Remove the air baffle from the HDD carrier (B).

4Save the air baffle and screws for later use.

5Set any jumpers and/or switches on the drive according to the drive manufacturer’s instructions.