68 | 3 System upgrade |
To remove a PCI riser board
1Observe the ESD precautions and
2Remove the CPU air duct. Perform the instructions described in “To remove the CPU air duct” section on page 42.
3Remove the PCI riser assembly from the server. See “To remove the PCI riser assembly” section on page 65.
4Remove any installed PCI cards from the riser board. See “To remove a PCI card” section on page 69.
5Press the blue release lever at the end of the PCI riser board (A).
6While holding the lever in, press firmly on the other end of the board to disengage the board from the assembly (B)
7Remove the riser board from the PCI riser assembly (C).
8Store the riser board in an antistatic protective wrapper.
9Repeat steps 4 through 7 to remove the other riser board.
10Observe the
To install a PCI riser board:
1Observe the ESD precautions and
2Remove the CPU air duct. Perform the instructions described in “To remove the CPU air duct” section on page 42.