Radio Shack TAD-1028 Telephone Operation, Setting the Handset Volume, Using Reset, Using Redial

43-788.fm Page 14 Monday, August 16, 1999 8:19 AM

TELEPHONE OPERATION

Make and answer phone calls on the TAD-1028 as you would with any other phone. Read this section to learn about the phone’s special features.

redial long distance as well as local numbers.

SETTING THE HANDSET VOLUME

The handset’s volume control lets you adjust the sound you hear through the handset.

Illus. showing

the handset volume control.

USING RESET

To disconnect a call without hanging up the phone, simply hold down RESET for about 1 second. When you release it and hear a dial tone, dial again.

Illus. showing

RESET button.

To increase or decrease the volume, roll the handset’s volume control up or down.

USING REDIAL

You can quickly dial the last number di- aled. When you hear a dial tone, simply press REDIAL.

Illus. showing

the REDIAL button.

Note: The redial memory holds up to 31 tone digits or 32 pulse digits, so you can

USING TONE SERVICES ON A PULSE LINE

Some special services, such as bank- by-phone, require tone signals. If you have pulse service, you can still use these special tone services by following these steps.

1.With TONE/PULSE set to PULSE, dial the service’s main number.

2.When the service answers, set

TONE/PULSE to TONE. Any addi- tional numbers you dial are sent as tone signals.

3.After you complete the call, set

TONE/PULSE back to PULSE and hang up the phone.

14