10
Note: If you pick up the phone just as
the TAD-277 answers, the TAD-277
might not stop recording the message.
If this happens, briefly hang up the
phone then pick it up again.
PLAYING MESSAGES
When you have messages, the mes-
sage indicator blinks. If you have four
messages or less, the light blinks once
for each message stored. (For exam-
ple, if you have two messages, the light
blinks twice followed by a 2-second
pause, then blinks twice more, and so
on.) If you have more than four mes-
sages, the light blinks continuously.
Note: The light also blinks continuous-
ly if the TAD-277 receives one or more
incoming messages after power is in-
terrupted (see “Troubleshooting” on
Page 13).
To play the messages, press PLAY.
The TAD-277 beeps once, rewinds
the tape, then plays the messages.
Notes:
To pause playback, press PLAY.
To restart playback, press PLAY
again.
If you do not restart playback
within 60 seconds, the tape fast-
forwards to the end of the last
incoming message, as though
playback was never started. This
helps prevent accidental erasure
of incoming messages.
If a call comes in while play back is
paused, the tape immediately
fast-forwards to the end of the last
message and answers the call.
After you play back all the messages,
the TAD-277 beeps twice, rewinds to
the beginning, and resets to answer
calls. New messages will be record ed
over the messages you have heard.
To save the messages, press SAVE
before a new call is recorded. The
tape fast-forwards to the end of all the
messages and resets to answer calls.
To replay the messages, simply press
PLAY again.
43-777.fm Page 10 Friday, August 13 , 1999 3:44 PM