Radio Shack TAD-704 owner manual Troubleshooting

43-704.fm Page 24 Wednesday, November 17, 1999 4:47 PM

TROUBLESHOOTING

We do not expect you to have any problems with your TAD-704, but if you do, try these suggestions.

	Problem:		Suggestion:
The incoming mes-		Be sure the memory is not full.
sage is incomplete.
The incoming mes-		Be sure VOLUME is set to the desired sound level.
sage is unclear.
The TAD does not		Be sure the TAD is set to answer calls.
answer after two, four,
or seven rings.
	appears on the	The backup battery is weak. Replace the battery (see
display.		“Installing a Backup Battery” on Page 7).
The TAD does not		Make sure the phone you used to dial the TAD is a
respond to the remote		touch-tone phone, or use a pocket tone dialer.
operation security
		Re-enter your remote operation security code, pressing
code.
		each button for 2 seconds.
		Make sure the remote operation security code you
		entered is correct, or try entering the default code of
		704. The remote operation security code might have
		reset to the default code due to a power failure and
		weak backup battery.
Display is blank.		The backup battery is weak. Replace the battery (see
		“Installing a Backup Battery” on Page 7).
		Make the sure AC power is properly connected.
The TAD displays and		Make sure the AC power is properly connected. If the
receives Caller ID		AC power fails, the TAD can receive Caller ID records
records but does not		but cannot operate using backup battery power.
operate.
Phone dials 1+ area		Store the local area code (see“Setting the Area Code”
code + number when		on Page 8).
dialing a local number
from a Caller ID record.
24