21-1672.fm Page 24 Thursday, August 5, 1999 12:04 PM

Scanning Incoming Signals

To scan incoming signals, press SCAN. SCAN appears on the display, and the walkie-talkie stops for 5 seconds on each chan- nel where there is a transmission. Press SCAN again to stop au- tomatic scanning. SCAN disappears from the display.

Alternating Between Two Channels

To alternate between two channels, select one channel and press DW (dual watch). DW appears on the display. Using the UP or DWN channel buttons, select another channel.

24

Page 24
Image 24
Radio Shack TRC-232 owner manual Scanning Incoming Signals, Alternating Between Two Channels