Radio Shack TRC-232 owner manual Replacing the DC CAR Adapter Fuse

21-1672.fm Page 34 Thursday, August 5, 1999 12:04 PM

This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:

1.This device may not cause harmful interference.

2.This device must accept any interference received, includ- ing interference that may cause undesired operation.

REPLACING THE DC

CAR ADAPTER FUSE

The DC car adapter has a 32V 2-amp fuse in the cigarette lighter plug. When replacement is required, use a slow-blow glass fuse, such as Cat. No. 270-1023.

1.Turn the cap on the adapter plug counterclockwise to un- screw it from the plug body.

2.Remove the old fuse and inspect its condition. If it is “blown” and requires replacement, insert a new 2-amp fuse. If it is not “blown,” reinsert it.

3.Replace the spring, the terminal, and the cap and screw the cap in tightly.

34