power nozzle™ assembly & operation
Assembly
a.Prior to using the Power Nozzle, follow the Quick Start Guide on pages
b.Insert the bottom wand with male end into the opening located on top of the Power Nozzle. Press downward until button lock clicks.
Operation
a.Plug in the Rainbow.
b.Turn the Rainbow power switch to HIGH mode.
c.On the hose handle, turn the Airflow Control Vent to FULL POWER.
d.To disengage from the upright position, place your left foot on top of the Power Nozzle. Next, grasp the wand assembly and pull backward.
e.Squeeze the trigger on pistol grip hose handle to activate the Power Nozzle. Release trigger to turn Power Nozzle off. Optional: Use the trigger lock switch. (See page 7.)
f.Guide Power Nozzle slowly back and forth over carpet with free and easy strokes. Let the Power Nozzle and Rainbow do the work.
g.To lock Power Nozzle into the upright position, place your left foot on top of the Power Nozzle. Next, grasp the wand assembly and push forward until wand system is fully engaged in locking tabs.
h.To disconnect the Power Nozzle from the wand, place your foot on the foot release above the pivot arm.
1 |
3 |
5 |
7 |
9 |
2 |
4 |
6 |
8 |
17
