Ramsey Electronics PR20 manual Input and Output Connections

two mechanical points after making sure that L1 is pressed firmly against the component side of the PC board.

PROGRESS SUMMARY: The wiring of your Ramsey PR series preamp PC board is now complete. It will take you less than a minute to completely recheck every single soldering connection as well as for the appropriate part installations.

Correct parts placement checked.

PC board soldering checked...touched up if needed.

INPUT AND OUTPUT CONNECTIONS

Use short pieces of miniature coax such as RG-174 to connect the PC board input and output points to the RF connectors you wish to use. For the neatest installation, it is good practice to pre-tin the coax ends before soldering to the PC board. Plan your probable applications with as much foresight as possible so that you don’t spend more on cable adapters than you did on the kit!

PR20—8