Symmetricom Complete XLi Manual for Configuration and Testing Procedures

SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS

Then click the “Close” button.

10.In the “New Application Builder – Display Fields” popup click the “Next” button. In the “Menu Path” field enter “XLI->Status”. Click the “Finish” button.

11.Repeat steps 6 – 10 using the “Application ID:” of xliconfig selecting all items under “iso -> org -> dod -> private -> enterprises -> trueTimeEnt -> products -> xli -> xliSystem -> systemFault -> sys- temFaultConfig” and using the “Menu Path” of “XLI->Configuration”.

12.Repeat steps 6 – 10 using the “Application ID:” of xlifault selecting all items under ““iso -> org -> dod -> private -> enterprises -> trueTimeEnt -> products -> xli -> xliSystem -> systemFault -> system- FaultHistory” and using the “Menu Path” of “XLI->Fault History”.

Additional OpenView configuration

1.Select the menu item “Options->SNMP Configuration”. A popup titled “SNMP Configuration” will ap- pear.

2.In the “SNMP Configuration” popup: set the “Community” field to “public” the “Set Community” field to “private” and the “Retries” field to 0.

XLi Configuration

SNMP Configuration

Follow the manual to load the snmp.conf configuration file into the XLi. The IP address of the HP OpenView PC must be in both the public and private communities.

Test Procedure

Testing “Get”

1.From the Network Node Manager root level double click the icon “Internet”. Select the icon corre- sponding to your test subnet, e.g. “192.168.11”, and double click. Double click the “Segment1” icon.

2.Select the icon labeled “NIC” by single clicking with the mouse.

3.Select the menu item “XLI->Status”, “XLI->Configuration”, then “XLI->Faults”. Verify the values by comparing with the output of the keypad display.

Testing “Set”

1.Follow “Get Testing” procedure steps 1-2.

2.Select the menu item “Tools->SNMP MIB Browser”. A popup titled “Browse MIB” will appear.

3.In the “Browse MIB” popup descend the MIB tree to “iso -> org -> dod -> private -> enterprises -> trueTimeEnt -> products -> xli -> xliSystem -> systemFault -> systemFaultConfig -> systemFault- ConfigMasks” by clicking the “+” symbol next to each entry.

186 XLi IEEE 1588 Clock

997-01510-03, Rev. C, 12/12/2006