Symmetricom XLi IEEE 1588 Logging Out, Changing Username and Password, Logout logoff exit quit

SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS

Logging Out

You can log out using any of the following commands:

logout logoff exit quit

Changing Username and Password

To change the user name and password, use the following commands:

•“F100 P – Change User Password” on page 95

•“F100 PN – Change User Name” on page 97

To reset a lost or forgotten operator username/password, use F100 P and F100 PN commands from the command line interface on the serial port.

Session Timeout and Priority

The XLi’s system firmware closes inactive command line sessions on the network port after 15 minutes. The XLi does not terminate inactive command line sessions on the serial port.

The user can open a network port session and a serial ports session concurrently, provided the other session is inactive (i.e., not actively performing a function such as F8 - Continuous Time Once-per- Second). The XLi does not allow two or more concurrent network port sessions.

A network port session can be active while an inactive serial port session is open. However, if the serial port session receives user input at this point, it takes control away from the network port and does not yield control to the network port again. The network port will show a prompt, but won’t accept additional commands after the serial port has taken control. Attempting to close the network port session and open a new one will fail; a network port connection cannot be re-established until the serial port has been closed. The following transcripts shows a ‘contest’ between a serial and a network port session:

Serial port session:

>f100 ic

f100 IP:192.168.46.150 SM:255.255.255.0 G:192.168.46.1

>NOTICE: A NEW TELNET SESSION HAS BEEN STARTED ON THE INTERNET PORT!

>f100 ic

NOTICE: THERE IS ALREADY A TELNET SESSION ON THE INTERNET PORT!

NOTICE: YOU HAVE TAKEN CONTROL AWAY FROM THE TELNET SESSION! f100 IP:192.168.46.150 SM:255.255.255.0 G:192.168.46.1

>f100 ic

f100 IP:192.168.46.150 SM:255.255.255.0 G:192.168.46.1

>

30 XLi IEEE 1588 Clock

997-01510-03, Rev. C, 12/12/2006