Symmetricom XLi IEEE 1588 manual Additional Products

SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS

For the XLi, groups 1, 2, 3, 4 and 5 have been deprecated and a new group 6, products, has been added. For the XLi and future Symmetricom products, groups 1 through 5 will be absent from the XLi Enterprise MIB definition supplied with the unit. The top structure for the XLi is:

TrueTimeEnt

= 1896

products

= 6

xli = 1

Additional Products

xliTrap			xliSystem		xliMainCard
= 0		= 1			= 2
	systemFault			systemStatus	ntp
	= 1			=2	= 1

xliOptionCards

= 3

Additional

Option

Cards

systemAlarmData

= 1

systemFault

Config

= 2

systemFault

History

= 3

systemStatus

General

= 1

systemStatus

Detail

= 2

The level under the xli group is divided into four groups; the first two of which will be explained later. The optionCardGroup has all the available option cards under it. Under each option card is a table for that option card type because there may be multiple cards of that type within an XLi chassis.

The current traps message group is located under the fault. The ntp group is under the xliMainCard group as an option, and is related to only to NTP on the standard network port on the XLi’s Main CPU card. For each instance of an NTP option card, the NTP group will be repeated under the optionCards group. GPS is located under the optionCards group, and is repeated for each GPS option card. The ntsControl and acts groups have not been implemented for the XLi.

178 XLi IEEE 1588 Clock

997-01510-03, Rev. C, 12/12/2006