Symmetricom XLi IEEE 1588 manual Request the PTP Subdomain Name, Set the PTP Subdomain Name

SSSSS	S	SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS
where:
F	=	ASCII character F
131	=	unit function number
<SP>	= space
B	= ASCII letter to denote Option Bay number follows
<N>	=	Option Bay Number, 1 through 4.
PROTOCOL	= specify PTP Protocol command
<SI>	= Sync Interval in seconds, 1, 2, 8, 16 and 64
<BS>	=	Burst Setting, ENABLE or DISABLE
<PO>	=	PTP Port Setting, ENABLE or DISABLE

For example, enter:

F131 B4 PROTOCOL 16 ENABLE DISABLE

Response (one of the following lines):

OK - Protocol Settings have been received and applied by the PTP Option Card<CR><LF>

Request the PTP Subdomain Name

To request the PTP Subdomain Name, use the following format:

F131 B<N> SDN<CR>

For example, enter:

F131 B4 SDN

Response (example):

F131 B4 SDN _DFLT <CR><LF>

Set the PTP Subdomain Name

To set the PTP Subdomain Name, use the following format:

F131<SP>B<N><SP>SDN<SP>SUBDOMAIN

130 XLi IEEE 1588 Clock

997-01510-03, Rev. C, 12/12/2006