Symmetricom XLi IEEE 1588 manual F100 L Remote Lockout, To users on the serial port, XLi responds

SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS

where:

F= ASCII character F

100= unit function number <S> = space

LOCK = specify LOCK command <CR> = input line terminator

For example, enter:

F100 LOCK<CR>

To users on the serial port, XLi responds:

OK<CR><LF>

Or, to users on the network port, XLi gives the following response and then closes the port:

GOODBYE.<CR><LF>

To unlock remote lockout, use the command line interface on the serial port to enter:

F100 UNLOCK<CR>

Or use the keypad/display’s F100.

F100 L – Remote Lockout

Command Line Only – Not available in display.

Use function F100 L to display the status of the remote lock. For more information, see F100 LOCK above.

To view the lock setting for remote access, enter:

F100 L<CR>

where:

F= ASCII character F

100= unit function number <S> = space

L= specify L command <CR> = input line terminator

XLi IEEE 1588 Clock 87

997-01510-03, Rev. C, 12/12/2006