Symmetricom XLi IEEE 1588 manual Request the PTP Preferred Master Clock Configuration, F131 B4 PM

SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS

Request the PTP Preferred Master Clock Configuration

Use this command to review the PTP Preferred Master Clock configuration settings. To obtain the PTP Preferred Master Clock configuration setting, use the following format:

F131 B<N> C<CR>

For example, enter:

F131 B4 PM

Response (example):

F131 B4 PM ENABLE<CR><LF>

Enable or Disable the PTP Preferred Master Clock Configuration

Use this command to enable or disable the PTP Preferred Master clock configuration settings. To set the PTP Preferred Master clock configuration, use the following format:

F131 B<N><SP>PM<SP><CONFIG>

where:

F	=	ASCII character F
131	=	unit function number
<SP>	= space
B	= ASCII letter to denote Option Bay number follows
<N>	= Option Bay Number, 1 through 4.
PM	=	specify PTP Preferred Master command
<CONFIG>	= ENABLE or DISABLE.

For example, enter:

F131 B4 PM ENABLE

Response (one of the following lines):

OK - Preferred Master Clock Config has been received and applied by the PTP Option Card

Request PTP Network Parameter Status

Use Serial/Network port F131 B<N> S command to review all of the PTP Option Card Protocol Parameters status. To obtain the PTP Network Parameters status, send the following command to the XLi serial/network port:

134 XLi IEEE 1588 Clock

997-01510-03, Rev. C, 12/12/2006