Have you ever been frustrated with the range of your remote
controls? Tired of having to bounce your IR remote off of
ceilings and walls? Do you want to run your system from
another room or floor? Here is the answer to your prayers!
Extend the range of your remote controls through walls, around
corners, and even from outdoors!
•The separate IR Receiver module (RRW1A) with sensitive element
can receive your remote control’s signal up to 36 feet away befo re
re-broadcasting it wirelessly!
•The receiver (RRW1B) reconstitutes the radio signal using a PIC
micro-controller to restore noisy or weak signals and then re-
broadcasts the IR remote’s signal to your components via a wired
high-efficiency IR LED.
•Extend the range of your remote control to greater than 100 f eet
wirelessly beyond the receive range of the IR sensor. Greater than
300 feet with a directional antenna pair (available separatel y).
•Works with almost any remote control (38 kHz carrier), does no t
need to be programmed.
•Operate from 8V to 16V AC or DC. Use our AC125 wall adapt ers
for long operation.
•LED indicator lets you know when you are receiving an IR signal
or not.