Rangemaster L2 515 695, L 540 720 Installation, Drilling the Support surface and Fitting the Hood

INSTALLATION

Drilling the Support surface and Fitting the Hood

The Hood can be fitted directly to the underside of the Wall units (min. 650 mm above the cooker top) with snap-on side supports, which are set up for a support panel thickness of between 15 mm and 30 mm.

•Cut a fitted opening in the bottom surface of the wall unit, as shown.

•Remove the metal grease filters (see par. on

Maintenance).

• Disconnect the filter support by turning the internal handles provided.

• Insert the hood until the side supports snap into place.

• Lock in position by tightening the screws Vf from underneath the hood.

Hood Type	54	72	375
L2	515	695

L2

Vf

GB 14