Rangemaster manual Hob Overview, DocNo.021-0001 - Overview RG60 gas

2. Hob Overview

DocNo.021-0001 - Overview RG60 gas

Fig.2-1

ArtNo.316-0008 RG70 hob iso

The diagram by each of the control knobs indicates which burner that knob operates (Fig.2-1). Each burner has a special Flame Safety Device (FSD) that stops the flow of gas if the flame goes out.

To light a burner, push in and turn the associated control knob anti-clockwise (Fig.2-2)to the ‘high’ position indicated by the large flame symbol []. Keep the knob pressed down for 3-5 seconds to let the gas through to the burner. The igniter should spark and light the gas.

If, when you let go of the control knob the burner goes out, then the safety device has not held in. Turn the control to the off position and wait one minute then try again, this time holding in the control knob for slightly longer.

Adjust the flame to suit by turning the control knob clockwise (Fig.2-3).

Ensure that the flames are under the pans. Using a lid will help the contents boil more quickly (Fig.2-4).

Large pans should be spaced well apart.

Fig.2-2

ArtNo.316-0002 RG60 control to high

Fig.2-3

ArtNo.316-0003 RG60 Control to low

Fig.2-4

ArtNo.311-0001 Rightpans gas

3