Fitting the stability bracket, Levelling

INSTALLATION

Check the appliance is electrically safe when you have ﬁnished.

the 8mm socket or levelling tool until it is roughly level.

Fitting the stability bracket

The appliance is front heavy when the doors are opened so the rear needs to be ﬁxed to the ﬂoor. A stability bracket is included with the appliance for this purpose. It is not suﬃcient to rely on the worktop as a downward force on the oven doors could cause the worktop to crack.

Plan View

KITCHEN WALL

	400mm	400mm
L.H	A B		R.H
Cabinet	500mm	500mm	Cabinet

	Door Front	Front edge of door will align
	Door Front	with appliance side trim front
		with appliance side trim front

1.Fix the stability bracket to the ﬂoor in the position shown in the attached diagram. When the doors are opened quite a large force can be levered onto the bracket. It is essential to ensure the screws are ﬁrmly held using Rawl type plugs where necessary.

2.Set the height of the top arm so that it is higher than the appliance rear member.

Electrical Connection

This appliance must be installed by a qualiﬁed electrician to comply with the relevant Institute of Electrical Engineers (I.E.E.) regulations and also the local electricity supply company requirements.

WARNING: THIS APPLIANCE MUST BE EARTHED Note

The appliance must be connected to the correct electrical supply as stated on the voltage label on the appliance, through a suitable cooker control unit incorporating a double pole switch having a contact separation of at least 3mm in all poles. This appliance

must not be connected to an ordinary domestic power point.

The unit is ﬁtted with a mains cable to facilitate connection to a wall point. If the cable needs to be changed then access to the mains terminal is gained by removing the electrical terminal cover box on the back panel. Connect the replacement cable to the correct terminals for your electrical supply type (see ﬁg.). Check that the links are correctly ﬁtted and that the terminal screws are tight. Secure the mains cable using the cable clamp. Ensure the cable route avoids the risk of trapping or touching hot surfaces such as the underside of the hotplate.

Current Operated Earth Leakage Breakers

Where the installation is protected by a 30 milliamp sensitivity residual current device (RCD), the combined use of your appliance and other domestic appliances may occasionally cause nuisance tripping. In these instances the kitchen circuit may need to be reconﬁgured. This work should be carried out by a qualiﬁed electrician.

Levelling

The worktop should already be ﬁtted and levelled, and the cabinets mounted 90 degrees to the worktop. It is therefore only necessary to ensure the top front edge of the appliance unit supports the front edge of the worktop and line up the appliance trims with the doors as follows.

1)Ensure gas pipes and electrical cable will not be trapped by the appliance when it is pushed into position.

2)Place the appliance in its intended position taking care not to twist it within the gap between the kitchen units as damage may occur to the appliance or the units.

U108910

U108910-01 specifications

The Rangemaster U108910-01 is a sleek and powerful addition to modern kitchens, designed to meet the needs of culinary enthusiasts and home cooks alike. This premium appliance boasts a variety of features and technologies that enhance cooking performance while providing an elegant aesthetic.

One of the standout characteristics of the Rangemaster U108910-01 is its dual-fuel cooking capability. This model combines gas cooking with an electric oven, allowing users to enjoy the precision of gas flames while benefiting from the even heat distribution of an electric oven. This dual-fuel system provides flexibility and control, making it ideal for various cooking styles, whether you're roasting, baking, or simmering.

With a generous cooking capacity, the Rangemaster U108910-01 offers multiple oven cavities, including a main oven and a secondary oven. The main oven typically features a fan-assisted design, which promotes uniform cooking temperatures and reduces cook times, while the secondary oven can be used for slow-cooking or baking multiple dishes simultaneously. This dual-oven setup allows for a more efficient cooking experience, especially during gatherings or holiday meals.

Additionally, this model is equipped with advanced technologies such as multi-function cooking settings. Users can select from various cooking modes, including conventional, fan-assisted, grill, and more, giving them the versatility needed to create a vast range of dishes. The intuitive control panel features easy-to-navigate dials and digital displays, ensuring that even those who are not tech-savvy can operate it with ease.

The Rangemaster U108910-01 also prioritizes safety, featuring robust safety measures like flame failure devices that cut off the gas supply if the flame is accidentally extinguished. This ensures peace of mind while cooking, making it a reliable choice for families.

In terms of design, the Rangemaster U108910-01 is often praised for its stylish finish, available in various colors to complement any kitchen décor. The professional-grade knobs and sturdy construction add a touch of sophistication, making it not just an appliance but a centerpiece of the kitchen.

In summary, the Rangemaster U108910-01 is a versatile and stylish cooking appliance that combines advanced features like dual-fuel capabilities, multiple oven cavities, and a range of cooking settings with a commitment to safety and style. It is an investment for any serious cook looking to elevate their culinary experience while enjoying the aesthetic appeal of their kitchen.

Rangemaster U108910-01 manual Fitting the stability bracket, Electrical Connection, Levelling

Models: U108910-01