fig.2-12

°C ALARM

fig.2-13

°C ALARM

SUPER FROST

SUPER FROST

Warning Alarm

Your appliance is equipped with sensors in the fridge and freezer sections which assess the temperature.

If the recorded temperature in either section goes above the temperature set on the thermostat dial, the Warning Alarm neon will light (fig.2-12).

There will also be an audible warning signal to make you aware that the sensors have sensed a temperature rise.

The warning alarm neon will stay switched on until the recorded temperature has fallen to the level set on the thermostat dial.

To silence the audible alarm, press the Warning Alarm off button (fig.2-13).

note: The warning alarm neon will switch on if either of the doors have been open for a period of time or if the thermostat dial has been turned clockwise to a colder setting.

If the Warning Alarm neon stays lit for a prolonged period, then please contact the Customer Service.

During First Use

Set the thermostat dial to its maximum setting for 24 hours after switching on the appliance for the first time.

When you first switch on the appliance, the compressor will run continuously for approximately 24 hours or until the fridge freezer reaches a cool enough temperature.

During this time, try not to open the door frequently or place a large amount of food within the appliance.

You should then adjust the thermostat dial down to its normal operating position.

If the unit is switched off or unplugged, you must allow at least 5 minutes before restarting the appliance on the thermostat or connecting it to your mains supply.

8

Page 10
Image 10
Rangemaster U110122-01B manual During First Use