Page 4 of 18
WPTS/
MOB
WAYPOINT AT
CURSOR
WAYPOINT AT
VESSEL
WAYPOINT AT
POSITION…
GO TO WAYPOINT
OPTIONS…
REVIEW AND EDIT
WAYPOINTS...
ERASE WAYPOINT SORT LIST SET DEFAULT SYM
& GROUP...
WAYPOINT
GROUPS... EDIT WAYPOINT…
EDIT DEFAULT
SET UP DEFAULT
SYMB GROUP
SET UP DEFAULT
SYMB GROUP

How do the controls work?

?More information...
Press and hold MENU to display help information for the currently displayed soft keys.
For more information on the controls refer to
Chapter 2 - General Operation and System Set Up of the C-Series Display Reference Manual
The controls for your C-Series Display can be separated into two types:
 Buttons
 Soft keys
Buttons - allow you to access various functions of the display, or change what you see on the screen.
Soft keys - There are five soft keys below the screen. When a specific button is pressed the primary
soft key options for the active application are shown at the bottom of the screen.
Pressing a soft key will carry out one of the following functions:
- take an action.
- select one of several options.
- display on-screen information, dialog boxes or menus with new soft keys.
- display further soft key options.
Soft keys sometimes interact with other on-screen controls, such as dialog boxes - to edit names etc,
menus to select options.
D6762_2
Getting Started

Using the controls

Card No. 2
ROUTE…GOTO…FIND SHIP…TRACKS…PRESENTATION…