30

Subject to the limitations below, the product will be repaired or replaced (at the discretion of Raymarine or a Raymarine Service Agent) at no further cost and promptly returned to the customer.

3.3In cases where the customer is making a warranty claim and the product has been installed by a Raymarine certified installer, (boat builder, installer, dealer etc.) i.e. Onboard warranty, the nearest Raymarine approved service agent should be contacted and onboard service requested (which will be subject to the limits referred to in paragraph 4.12 below). Before the onboard warranty service is performed, the customer must have available:

3.3.1proof of purchase showing the date of purchase and the name of the supplier of the product; and

3.3.2the serial number of the affected product; or

3.3.3proof of installation of the product by a Raymarine certified installer; or

3.3.4a warranty card completed by the product supplier (which will contain the information required by paragraphs 3.3.1 and 3.3.3).

3.4In cases where onboard warranty has been purchased - as described in 2.3; the nearest Raymarine approved service agent should be contacted and onboard service requested, information detailed in 3.3.1 and 3.3.2 is required. Onboard warranty service will only be performed if the product serial number confirms that the onboard warranty service has been purchased and is valid.

4. Warranty limitations

4.1Raymarine warranty policy does not apply to any product that has been subjected to accident, abuse or misuse, shipping damage, alterations, corrosion, incorrect and/or non- authorized service, or products on which the serial number has been altered, mutilated or removed.

4.2Certain products do not carry the onboard warranty, as described in section 2 above, unless the onboard warranty cover is purchased at the time of installation. The purchaseable onboard warranty is only available on products purchased in specific territories, for further details refer to the internet at www.raymarine.com or contact your nearest Raymarine National Distributor.

4.3Products purchased outside the country of installation will not be covered by onboard warranty.

4.4Raymarine assumes no responsibility for damage incurred during installation or as a result of improper installation.

4.5This warranty does not cover routine system checkouts, alignment/calibration, seatrials or commissioning, unless required by replacement of part(s) in the area being aligned.

4.6Raymarine assumes no responsibility for damage caused by or to other equipment, systems or components occasioned by improper or unauthorized connection, or use, of the product.

4.7Consumable items, including, but not limited to: fuses, batteries, drive belts, radar mixer diodes, snap-in impeller carriers, impellers, impeller bearings, and impeller shafts are specifically excluded from this warranty. A complete list of the consumable items relating to each product can be found in the Owner’s Handbook and/or on the internet at www.raymarine.com.

4.8All costs associated with transducer replacement, other than the cost of the transducer itself, are specifically excluded from this warranty.

4.9Overtime/premium labour portion of services outside of normal working hours is not covered by this warranty.

4.10If repairs are necessary under the warranty, the affected product must be forwarded to a Raymarine facility or a Raymarine approved service agent, at the owner’s expense.

4.11The Raymarine warranty does not cover any differences in material, coloring or size between those alluded to in corporate advertising, literature or published on the internet, which are not specifically objected to at the time of delivery.

4.12Travel costs other than auto mileage, tolls and two (2) hours travel time, are specifically excluded from the warranty on all products. Costs, which are excluded from the coverage of this warranty, include but are not limited to; taxi fares, launch fees, aircraft rental, subsistence, customs, shipping, and communications charges etc.

4.13Neither Raymarine nor a Raymarine service agent shall be liable for any incidental, indirect, consequential or special (including punitive or multiple) damages, nor shall

Page 33 Page 35
Page 34
Image 34
Raymarine Radome Scanners manual Warranty limitations
Page 33 Page 35

Radome Scanners specifications

Raymarine Radome scanners are an essential component for maritime navigation, providing boaters and marine enthusiasts with reliable radar technology. These radar systems are known for their durability, efficiency, and advanced performance, making them a popular choice for both commercial and recreational vessels.

One of the standout features of Raymarine Radome scanners is their compact and lightweight design. This makes them particularly suitable for smaller boats where space can be a concern. Despite their size, these scanners deliver impressive range and resolution, ensuring accurate detection of other vessels, landmasses, and weather phenomena.

The technology employed in Raymarine Radome scanners includes patented CHIRP Pulse Compression, which enhances target separation and improves the ability to distinguish between close and distant targets. This leads to clearer images and more reliable data, ensuring operators can make informed decisions while navigating.

Another significant characteristic of these radomes is the advanced signal processing capabilities they offer. The radar systems can filter out clutter, such as waves and rain, to provide clear representations of objects that matter, thus reducing false alarms and enhancing situational awareness. The integration of digital signal processing (DSP) allows for adaptive gain control, which optimizes performance under varying environmental conditions.

Raymarine Radome scanners are also designed to be user-friendly. The intuitive interface LCD displays or integration with multifunction displays allow for easy operation and access to critical navigation information. Users can customize their radar settings to suit their specific needs, which enhances usability and reduces the likelihood of operator error.

Many models also feature advanced maritime safety features such as MARPA (Mini Automatic Radar Plotting Aid), which tracks moving targets and provides information on their course and speed. This technology is vital for collision avoidance and ensures a safer boating experience.

In terms of compatibility, Raymarine Radome scanners seamlessly integrate with other Raymarine systems, creating a cohesive network of navigation tools. This compatibility allows users to layer radar data with charts and other navigational information, offering a holistic view of their surroundings.

In summary, Raymarine Radome scanners are characterized by their compact design, advanced technologies, and user-friendly interface. The combination of features such as CHIRP technology, digital signal processing, and safety enhancements make them a top choice for anyone looking for precision and reliability in maritime navigation. Whether for commercial use or recreational boating, these radar systems stand out for their performance and quality.
Top Page Image Contents