Raymarine Ray48 manual LCD Display, 1W Scan WX ALT MON INT MEM

3.2.2 LCD Display

The following describes the functional characters on the Ray48's LCD.

1W SCAN

WX ALT

MON

INT MEM

TX

Fig.3-2 LCD DISPLAY

1SCAN: Will flash by itself when All-Scan mode is to be initiated or will flash in unison with "MEM" when Memory Scan mode is to be initiated.

21 W (High/Low Power): Will be displayed when the transmitter circuits are providing 1 Watt of power to the antenna. When the transmitter is supplying 25 Watts to the antenna, the "1 W" indication will be extinguished.

3ALT (Weather Alert): Will blink when a Weather Alert Tone has been detected.

4WX (Weather): Will be displayed when the channel selected to be monitored is a weather channel.

5MON (Monitor): Will be displayed when the MON/INT key is pressed. This indicates the radio is in the MONITOR mode.

6INT (International/USA): Will be displayed when International channels are programmed for use. "INT" is not displayed when US channels are programmed for use.

7TX (Transmit): Will be displayed on the LCD when the Push-To-Talk (PTT) switch is depressed indicating the transmitter circuits are providing a signal to the antenna.

8MEM (Memory): Will be displayed when the SCAN key is pressed and held for two seconds, or when the radio is programmed to the MEMORY SCAN mode.

9LCD Segments: Will display channel number in use.

10