VII. Freeze Protection

If the heat pump is installed in a location subject to freezing conditions, it is important to protect the water circuit from freezing, just as should be done for the pump and filter.

System Drain-Down

1.Turn the heat pump circuit breaker or disconnect switch to OFF.

2.From the control panel, turn the control switch to Remote (OFF).

3.With the pool pump OFF, close the external shutoff valves and loosen the inlet and outlet water unions to allow water to drain. Use a Shop Vac or air pressure to remove excess water.

4.Re-attach the unions.

5.Cover the heat pump with a waterproof cover.

Continuous Pump Operation

It is also possible in some areas to prevent heat pump freeze damage by operating the pump continuously during freezing weather. However, this results in significantly higher pump operating cost. Further, if a sustained power failure occurs, the heat pump MUST be drained anyway, or freeze damage could result.

VIII. Maintenance

NOTE: The heat pump MANUFACTURER IS NOT RESPONSIBLE for maintenance adjustments.

The following maintenance procedures are designed to keep your heat pump operating at a high level of reliability. Maintenance must be performed on a periodic basis to maintain warranty coverage and prevent system failures and performance degradation.

A. Air Coil Cleaning - Efficient operation depends on free circulation of air through the thin and tightly-spaced fins of the evaporator coils. The evaporator must be cleaned whenever it has a buildup of dirt or debris.

1.

WARNING

Shut OFF electricity to the heat pump.

2.

CAUTION

To clean the fins, spray gently with a garden hose. DO NOT pressure wash, which will bend the fins and can void the warranty.

B. Cabinet Care (optional) - The cabinet is designed for outdoor use and requires little care. However, you can clean it if you wish.

1.

WARNING

Shut OFF electricity to the heat pump.

2. Wash the cabinet with soap and water.

6

Page 8 Page 10
Page 9
Image 9
Raypak 5100, 6100 owner manual VII. Freeze Protection, VIII. Maintenance
Page 8 Page 10

5100, 6100 specifications

Raypak has long been recognized as a leader in the pool and spa heating industry, and their models, the 6100 and 5100, stand out for their innovative features and advanced technologies. Both models are designed to provide efficient heating solutions for residential and commercial applications, ensuring that pool and spa enthusiasts enjoy optimal water temperatures year-round.

The Raypak 6100 is equipped with a robust heat exchanger made from copper and brass, ensuring excellent heat transfer and corrosion resistance. This model boasts an impressive BTU output, allowing it to heat water quickly, even in larger pools. It employs a digital thermostat and a user-friendly control panel, providing precise temperature control and ease of operation. The 6100 also features built-in safety measures, including a high-limit switch and a pressure switch to prevent overheating and ensure safe operation.

In contrast, the Raypak 5100 offers a slightly lower BTU output, making it suitable for smaller residential pools or spas. Nevertheless, this model does not compromise on efficiency or performance. Like the 6100, the 5100 utilizes a copper and brass heat exchanger, which maximizes heat transfer while ensuring durability. The digital controls on the 5100 also provide ease of use, featuring intuitive settings that allow users to fine-tune their heating preferences.

Both models utilize Raypak's exclusive polymer headers, which provide superior resistance to corrosion and longevity compared to traditional materials. These innovative designs prevent scale buildup and ensure efficient operation over time. Additionally, Raypak's heaters are designed for versatility, capable of running on both natural gas and propane, making them suitable for various settings and configurations.

Another key characteristic of the Raypak 6100 and 5100 is their commitment to energy efficiency. Both heaters are engineered to meet or exceed energy efficiency standards, reducing operational costs while minimizing their environmental footprint. With a streamlined design, installation is straightforward, and routine maintenance can be carried out with minimal effort.

Ultimately, the Raypak 6100 and 5100 models present excellent choices for anyone seeking reliable and efficient heating solutions for their pools or spas. With advanced technologies, durable construction, and an emphasis on user control and safety, these heaters are designed to meet the needs of modern pool and spa owners, ensuring comfort and enjoyment with every use.
Top Page Image Contents