Set up and usage instructions
qUnfolding the scooter for first time use.
1 Insert and secure the left and | 2 Make certain BOTH handlebars | 3 To release the folding |
right handlebars by depressing | are properly locked onto the | mechanism, place one foot on the |
the |
| deck plate and push joint release |
inserting them into the |
| lever down to release the |
|
| Extension Tube from the locked po- |
|
| sition. Raise |
|
| locked in the upright position. |
Note: The joint lever is spring- | 4 Depress the spring loaded button on the |
loaded and will automatically lock | extension tube. Turn the |
in the upright position when fully | extension tube and locks into place. To adjust the height of the handlebars, |
upright. | open the |
| resecure the quick release lever to lock into place. If the |
| maximum height, depress the spring loaded button located directly below the |
| quick release lever to lower the |
Note: The tension of the quick- release lever can be adjusted by tightening or loosening the allen bolt. Be careful not to
3
WARNING: Failure to properly secure the
WARNING: Keep your fingers clear of the folding mechanism when folding or unfolding the scooter. Make sure others are standing clear.
WARNING: Failure to properly secure the