Razor 13010440 Check before riding, q Replacing the Spark cartridge, q Using the Spark bar

Set up and usage instructions

qReplacing the Spark cartridge:

Friction during sparking will eventually wear out the replaceable cartridge and cause the scooter to stop making sparks. Worn out cartridges must be replaced.

1 Using your thumbs, press tabs	2 Place a new cartridge in back of the bracket making sure to align the slots
on both sides of the cartridge to	on the cartridge with the two legs of the bracket and slide cartridge forward
release from the bracket. Slide car-	until you hear a click and the thumb tabs are locked in place.
tridge away from you and remove
from bracket.

qUsing the Spark bar

When riding, place ball of foot on the Spark bar and gradually apply pressure. Only use enough pressure to cause sparking action.

Check before riding

qCollar Clamp

Using a 5mm allen key, check that the collar clamp bolt is tightened securely. This item is tightened and quality inspected at the factory, but there is a slight chance that the effects of shipping or handling may have caused this bolt to become loose.

qDeck Plate/Steering Column Adjusting Screw(s)

Using a 3mm allen wrench and with the scooter in the upright and locked position, adjust the set screw at the base- board until there is no free-play between the baseboard and the steering column. Be careful not to over-tighten this screw as it needs only be snug against the steering column. Verify the adjustment by releasing the steering column from the locked position and folding the scooter. The locking lever should not bind and the folding movement should be smooth when raising the handlebars. The spring-loaded mechanism should automatically lock and be fully seated in the upright position.

WARNING: Do not attempt to replace cartridge immediately after riding as cartridge will be hot. Handle only when cool.

WARNING: Keep fingers clear of Spark Bar hinge and fender brake.

WARNING: Applying too much pressure on the Spark bar may cause loss of control.

NOTE: Using any other part of the foot or full foot may activate the brake and prevent sparking action.

NOTE: Sparks and Spark cartridge life will vary based on the amount of pressure applied to the spark bar, the length of time pressure is applied and the smoothness of the riding surface.

Need Help? Visit our web site for replacement parts, product support and a list of authorized service centers at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.

4