Razor 13114501 owner manual Before YOU Begin, Estimated Assembly and Set-Up Time, Required Tools

BEFORE YOU BEGIN

Remove contents from box. Remove the foam separators that protect the components from damage during shipping. Inspect the contents of the box for scratches in the paint, dents or kinked cables that may have occurred during shipping. Because the EcoSmart Metro electric scooter was 95 percent assembled and packed at the factory, there should not be any problems, even if the box has a few scars or dents.

Estimated Assembly and Set-Up Time

Razor recommends assembly by an adult with experience in bicycle mechanics.

Allow up to 30 minutes for assembly, not including initial charge time.

Allow up to 12 hours for initial charge (see page 5 for charging information).

Throttle
Brake Lever
Adjuster
	Brake Lever
	T-tube
	Seat
	Clamp
	Luggage Rack
	Clamp
Headset	Frame
Front Fork	Deck Plate Motor
	Brake

Rear Wheel

Kick Stand

On/Off Switch	Charging Port
Battery Pack
and Motor Controller

Front Wheel

Charger Port

Charger Plug

WARNING:

DO NOT USE NON-RAZOR PRODUCTS WITH YOUR ECOSMART METRO ELECTRIC SCOOTER. The scooter has been built to certain Razor design specifications. The original equipment supplied at the time of sale was selected on the basis of its compatibility with the frame, fork and all other parts. Certain aftermarket products may or may not be compatible.

Required Tools

Phillips screwdriver	5 mm	13/15mm open wrench and	Spoke tightener
(included)	Allen wrench	8/10mm open wrench	(included)
	(included)	(included)

Need Help? Visit our website for replacement parts, product support and a list of authorized service centers at www.razor.com or call toll free 866-467-2967 Monday - Friday 8AM - 5PM Pacific Time. Please have the product I.D. code located on the white label on your product or back of charger available for better assistance.

2