![](/images/new-backgrounds/1137747/1377479x1.webp)
Assembly and Set-Up
qInflating the Tires
Tires are inflated when shipped, but they invariably lose some pressure between the point of manufacturing and your purchase.
1 Using a bicycle style tire pump equipped for a
qCharging the Battery
Your Pocket Mod may not have a fully charged battery; therefore it is a good idea to charge the battery prior to use.
• | Initial charge time: 18 hours | • Run time: Up to 30 minutes of continuous ride time |
• Recharge time: up to 12 hours | • Average battery life: 250 charge/discharge cycles | |
| depending on the level of depletion |
|
Note: The pressurized air supplies found at gasoline stations are designed to inflate
WARNING: Rechargeable batteries are only to be charged under adult supervision. Always disconnect your Pocket Mod from the charger before cleaning with liquid.
![](/images/new-backgrounds/1137747/1377479xi3.webp)
Charger Plug
Charger
Port
1 Turn power OFF before charging. Plug the charger into the charger port.
Note: Be sure to properly align the groove on the charger input plug with the corresponding socket on the case; otherwise, no charging action will occur.
2Plug the charger into a wall outlet. If the lights on charger do not light up, check the power to the outlet. If necessary, try a differ- ent outlet.
Note: If your charger does not look like the one illustrated, your unit has been supplied with an alternative charger. The specifications and charging procedure would not change.
The charger has a small window with one LED or two LEDs to indicate the charge status. Refer to the illustration on the charger unit for the actual “charging” and “charged” status indications for your model charger.
Chargers have
4