Razor MX650 Before You Begin, Estimated Assembly and Set-Up Time, Required Tools, 5mm and 6mm

Before You Begin

Remove contents from box. Remove the foam separators that protect the components from damage during shipping. Inspect the contents of the box for scratches in the paint, dents or kinked cables that may have occurred during shipping. Because the Dirt Rocket is 95 percent assembled and packed at the factory, there should not be any problems, even if the box has a few scars or dents.

MAKE SURE POWER SWITCH IS TURNED “OFF” BEFORE CONDUCTING ANY MAINTENANCE PROCEDURES.

Estimated Assembly and Set-Up Time

Razor recommends assembly by an adult.

Allow up to 30 minutes for assembly.

Allow up to 12 hours for initial charge (see page 5 for charging information).

	Charger
	Charger
	Port
	Charger
Brake Lever	Plug

Brake Lever

Front Fork

Speed Control

Brake Lever

Drive

Chain

WARNING:

DO NOT USE NON-RAZOR PRODUCTS WITH YOUR RAZOR DIRT ROCKET. The Dirt Rocket has been built to certain Razor design specifications. The original equipment supplied at the time of sale was selected on the basis of its compatibility with the frame, fork and all other parts. Certain aftermarket products may or may not be compatible and will void your warranty.

Required Tools

5mm and 6mm	10mm, 14mm and 17mm	Phillips	Spoke tightener	Bicycle tire pump
Allen wrenches	open wrenches	screwdriver	(Included)	for Schrader valve tires,
(Included)	(Included)	(Included)		with pressure gauge
2.5mm Allen wrench	19mm open wrench			(Not Included)
(Not Included)	(Not Included)

Need Help? Visit our website for replacement parts, product support and a list of authorized service centers at www.razor.com or call toll-free at 866-467-2967Monday - Friday 8:00 AM - 5:00 PM Pacific Time.

2