Manuals / RBH Sound / Home Audio / Speaker

RBH Sound 1001RB/210, 1001RB/115 manual Quick Start

Models: 1001RB 1001RB/115 1001RB/210

1 16
Download 16 pages 42.66 Kb
Page 5
Image 5

1001RB Series

Quick Start

The 1001RB Series is designed to be simple to operate. All controls have a well defined purpose and are well behaved. These directions will take you through the basics and give you a good start for setting up your sound.

First:

Set the power switch to Off and connect the supplied power cable, from the amplifier AC receptacle, to an AC power outlet of proper voltage and power rating (see safety information on page 7 for details).

Next:

Connect your speaker cabinets to the amplifier outputs marked 540W AMP ONLY or “SPEAKON” OUTPUTS. Be sure not to exceed the recommended speaker load below.

Maximum Recommended Speaker Load:

One 4 Ohm, or two 8 Ohm cabinets on the 540W Amp. One or two 8 Ohm horns on the 50W Amp.

If you are using an RBH Series cabinet, use the supplied

4conductor Speakon cable to connect to the “Speakon” outputs on the rear panel of the amplifier. Set the Woofer X-Over and Tweeter Hi Cut switches on the front panel to the IN position. You may want to adjust these later as you optimize your sound. In addition, set the switch on the RBH cabinet to Bi-Amp.

For connection to all other cabinets, connect to the 1/4” outputs labeled 540W amp only. Set the Woofer X-Over switch on the front panel to the Out position.

For more information on Bi-Amp and Normal Operation, see page 7.

Remember:

Playing loud with the master below 12 O’ clock will cause distortion. In some cases this is desireable.

Caution:

Do not connect the Speakon cable labeled “Bridge Mode” to the 1001RB. This may result in damage to the ampli- fier.

Then:

Set all the voicing filters’ EQ controls and the Boost control to 12 o’clock. Set the Woofer/Master to 3 O’ Clock, the tweeter to 12 O’clock and the volume to 0. If you have a five string bass, push the button marked String Bass in.

Next:

Using an instrument cable, connect your bass to the Input jack and turn the power switch on and play. If the input clipping LED flashes, push the button marked -10dbin. This will prevent you from overdriving the preamp. If you have a bass with passive electronics make sure the controls are all the way up. If you have a bass with active electronics, turn all of the EQ controls on the bass to the middle or flat position.

Now:

Slowly bring the Volume up.

You should be hearing your bass quite well. Your amplifier and instrument are currently set in their nominal position. From this point further adjustment may be required to accomodate your particular instrument, cabinet and playing styles. If you are using and RBH Bi-Amp cabinet you may want to adjust the tweeter control for balance first.

5

Page 4 Page 6
Page 5
Image 5
RBH Sound 1001RB/210, 1001RB/115 manual Quick Start
Page 4 Page 6

1001RB, 1001RB/115, 1001RB/210 specifications

RBH Sound has long been recognized for their commitment to delivering high-quality audio solutions, and the 1001RB series is no exception. This lineup includes the 1001RB/210, 1001RB/115, and 1001RB models, each offering unique features tailored to meet the demands of professional and home audio enthusiasts alike.

The 1001RB/210 is characterized by its dual 10-inch woofers, designed to produce deep, powerful bass without sacrificing clarity in the midrange and treble frequencies. With a power handling capacity of 1,000 watts peak, it provides ample headroom for dynamic musical passages. The cabinet is constructed from dense, high-quality materials that minimize unwanted resonance, allowing for a clean and accurate sound reproduction. This model is ideal for musicians and sound engineers looking for a robust solution for live performances or studio sessions.

On the other hand, the 1001RB/115 features a single 15-inch woofer, offering a slightly different tonal character. This setup enhances the low-end response, making it particularly well-suited for genres that rely heavily on bass frequencies, such as hip-hop and electronic music. Similarly, it boasts a peak power handling capability of 1,000 watts, ensuring it can handle the demands of intense performance environments. The integrated crossover ensures that frequencies are distributed effectively, enhancing the overall listening experience.

The 1001RB model serves as the foundation of this series, providing a versatile platform capable of adapting to various audio setups. It features advanced amplification technology that ensures efficiency and thermal management, helping to prevent overheating during extended use. Its lightweight design further enhances portability, making it easy for performers to transport between venues.

All models in the 1001RB series incorporate RBH Sound's precise engineering philosophies, ensuring impressive audio fidelity across different environments. Each speaker also includes user-friendly connectivity options, allowing for seamless integration into existing audio systems.

Whether you are a musician seeking reliable stage monitors or an audiophile looking to enhance your home audio experience, the RBH Sound 1001RB series promises to deliver performance, durability, and exceptional sound quality that meets the highest expectations. Overall, this lineup stands out in the competitive audio market, offering solutions that resonate with a wide range of users.