Installing the Speaker

1.Determine where each speaker cabinet will need to be installed.

2.If the cabinet is installed in a vertical position, the terminal cup will need to be on the top (see figure 1).

3.Position and brace the speaker cabinet in- between two studs by using a couple of screws to hold the speaker in place

(see figure 2).

NOTE: The front of the cabinet should be flush with the front of the studs.

4.Using the included wood screws, secure both sides of the speaker as shown in figure 3. Use a minimum of three screws per side to secure the cabinet.

OPTIONAL: Use construction adhesive between the speaker cabinet and studs to secure the speaker in place.

6.Connect speaker wire to the terminal plate.

7.If the cardboard debris shield was removed during the process of installing the speaker wire, replace it (see figure 4).

8.With the speaker wire ran and the cabinet secured between the studs the drywall can now be installed.

IMPORTANT: To avoid vibrations between the drywall and the speaker cabinet use construction adhesive and adhere the drywall to the speaker cabinet and studs for stability.

Figure 1

Figure 2

Figure 3

Figure 4

5

Page 5 Page 7
Page 6
Image 6
RBH Sound SI-663 owner manual Installing the Speaker
Page 5 Page 7

SI-663 specifications

RBH Sound SI-663 is an impressive loudspeaker that exemplifies the company's commitment to delivering high-quality audio performance. This compact yet powerful speaker is tailored for audiophiles who seek an immersive listening experience in a variety of environments. Its sleek design and advanced technologies make it an ideal choice for home theaters, music studios, and serious music enthusiasts.

One of the standout features of the SI-663 is its well-engineered driver configuration. The speaker incorporates a high-performance 6.5-inch woofer and a 1-inch tweeter. The woofer is designed to produce tight, punchy bass while ensuring clarity in low-frequency sounds. The tweeter, on the other hand, focuses on delivering crisp, clear high frequencies, allowing for a well-balanced soundstage. The combination of these drivers results in a dynamic audio experience that is both full-bodied and detailed.

RBH Sound has also integrated advanced technologies to enhance the performance of the SI-663. One notable feature is the use of a sophisticated crossover network. This network is meticulously designed to ensure that the correct frequencies are sent to each driver, optimizing their performance and minimizing distortion. The result is a seamless transition between the woofer and tweeter, delivering an accurate representation of the audio mix.

The SI-663 boasts an impressive frequency response, ranging from 55 Hz to 20 kHz. This broad range allows listeners to experience music and soundtracks with an unparalleled level of detail and depth. Additionally, the speaker's sensitivity rating is noteworthy, making it efficient and capable of delivering high sound levels with minimal power input.

Construction quality is another hallmark of the SI-663. The speaker is housed in a robust cabinet that not only minimizes resonance but also enhances the overall aesthetic appeal. The sleek finish and modern design make it a visually pleasing addition to any room.

In terms of versatility, the SI-663 can be deployed in various configurations. It can function as part of a larger surround sound system or serve as standalone units for stereo sound. With its powerful performance and stunning design, the RBH Sound SI-663 is a remarkable choice for anyone looking to elevate their audio experience. Overall, it exemplifies RBH Sound's dedication to providing high-quality, reliable audio solutions that cater to the discerning listener.
Top Page Image Contents