General Controls
Display Settings
EN Remote Control
TUNER | SOURCE | TAPE |
CD |
| AUX |
| E Q | B. | BOOST |
ON |
|
| DEMO/ |
|
| DIMMER | |
|
| VOL |
|
PREV |
|
| NEXT |
REV |
|
| FWD |
|
|
| |
|
| VOL |
|
OPEN/CLOSE |
|
| STOP |
ON — Turns power on or off from STANDBY mode.
CD — Selects CD player and change CD display information in CD playing mode.
TUNER — Selects radio tuner and change radio band in Tuner mode. TAPE — Selects tape player.
AUX — Selects Aux; turns the system on. EQ — Selects equalizer presets.
B
DEMO/DIMMER
VOL+ or VOL- — Increases/ decreases volume.
PLAY/PAUSE — Plays and pauses current CD.
NEXT /FWD — In CD mode - Skips forward to the next CD track;
In Tuner mode - Tunes up radio frequency.
Display | EN |
BASS |
SURROUND |
Showing Demonstration | 6. | Press TIMER to set volume. Press VOLUME |
| CONTROL up or down to set desired volume level. | |
|
| |
Not operational in CD mode. Press | 7. | Press PROG•SET to save settings or STOP to quit |
DIMMER•DEMO/CD DISPLAY to turn on/off |
| setting. |
demonstration mode. The demonstration scrolls |
|
|
through all display operations. |
|
|
REPEAT |
|
|
FM ST. | DISC SKIP | INTRO |
DN•PRESET•UP | SLEEP |
PREV /REV — In CD mode - Skips backwards to the previous CD track;
In Tuner mode - Tunes down radio frequency. OPEN/CLOSE — Opens and closes CD disc tray. STOP — Stops playing CD.
REPEAT — Repeats a track, CD, or all CDs.
MUTE | - mutes sound. |
SHUFFLE | — Turns on/off random playback. |
FM ST. - Toggles between FM stereo and mono. DISC SKIP — Skips to next CD.
INTRO - Turns INTRO mode on or off to play the first 10 seconds of each track.
PRESET UP/DN — Selects next/ previous preset station.
SLEEP - selects the time interval in minutes before the unit turns off.
Display Clock / Timer
Setting the Clock
1.Press and hold CLOCK until the hour flashes on the display.
2.Press DIGITAL TUNING or to set the hour and then press CLOCK to shift to minute digits.
3.Press DIGITAL TUNING or to set the minute.
4.Press PROG•SET to save settings and STOP to quit setting.
Activating the Timer
Press and release TIMER to turn on/off the timer. The
timer is active when the clock icon is lit.
Adjusting the Display Brightness
1.Press and hold DIMMER•DEMO/CD DISPLAY for more than 2 seconds.
2.While the dimmer is DIMM 2
displayed, press and release
DIMMER•DEMO/CD DISPLAY
repeatedly to select the desired level (DIMM 1 - 3).
Battery Size:
“AAA” or
NOTE: Cassette functions can not be operated from the remote control.
Installing Batteries
The remote control must be inserted with 2 “AAA” or “R3” or “UM 4” batteries prior to use. Follow the steps below to ensure correct installa- tion.
1.Open the battery compartment door (located at the back of the remote control) by sliding the cover out.
2.Before inserting the batteries, observe the polarities (that is, + and
3.After installation of the batteries, place the lit to cover the batteries. Lightly push it closed with a snap.
Note: When system is ON, you can press CLOCK to display the current time for about 2 seconds.
Setting the Timer
1.Press and hold TIMER until the ON appear with the hour flashing ( ON - timer on time )
2.For setting time, press DIGITAL TUNING or
to set the hour and then press TIMER to shift to minute digits.
3.Press DIGITAL TUNING or to set the minute.
4.Press TIMER to change to OF (timer off time) with hour flashing. Repeat steps 2 & 3 for timer off time setting.
5.Press TIMER to select source. Press DIGITAL
TUNING or to select TUNER, TAPE or CD.
Sleep Mode
You can select the time interval in minutes before the unit turns off automatically. Press SLEEP on the remote to select among OFF, 90, 60, 45, 30, 15 and 5 minutes. (Remote Only)
4 | 5 |