RCA 004-000-00345-4 user manual Radio, Tape Player

Radio

EN Selecting Tuner Band

1.Press SOURCE to select TUNER.

2.Press BAND to select between AM or FM radio band.

Tip: Your audio system has 32 preset stations.

Tuning to a Station

Press SKIP BACKWARD / SKIP FORWARD to select frequencies.

Auto Preset Programming

(FM only)

Press and hold BAND button for 2 seconds to scan stations in FM band. The stations will then be stored as preset channels. A maximum of 32 stations can be stored. Beware of your preset channels being erased accidentally because the scanning and storing process is automatic upon pressing the button. You can stop the automatic scan by pressing any button, but the erased stations cannot be recovered.

Tape Player

CD DISPLAY	AUTO PROGBASS BOOST	L	Continuous Play		EN
		VOLUM E CONTRO
DECK 1	DECK 2
PLAYBACK/ RECORD	PLAYBACK		1.	Insert a tape into deck 2 and start playback.
AUTOMATIC RECORD LEVEL • AUTO STOP MECHANISM	CONTINUOUS PLAY 2	> 1	2.	Insert a tape into deck 1 and press PLAY and
ONE TOUCH RECORDING	TAPE DUBBING 2	> 1		PAUSE together.

3.When the tape in deck 2 finishes playback, PAUSE at deck 1 will be released automatically and start playback.

Tape Player		Recording
		From Tuner
	RECORD	1. Insert a tape into deck 1.

	AUTO
87.50 MHz

PLAY	2.	Press SOURCE repeatedly to select TUNER and
REWIND		press BAND to access the desired radio band.
FAST FORWARD	3.	Tune to the station to be recorded.
STOP/EJECT	4.	Press RECORD to begin recording.

Using Presets

Manually Setting Presets

PAUSE 5. Press STOP to end recording.

The tuner can be in either TUNE or PRESET mode. When in PRESET mode, the PROG light is on.

•Press TUNE•PRESET to toggle TUNE and PRESET mode.

•Press SKIP BACKWARD or SKIP FORWARD on the main system or PRESET UP or DOWN on the remote control to access the previous or next preset station. The display first shows the preset program number and after a few seconds, the frequency will be displayed. (FMPR:01 is FM preset 1)

1.Press TUNE•PRESET button to enter TUNE mode.

2.Press SKIP BACKWARD / SKIP FORWARD to access the desired frequency.

3.Press the PROG•SET button once.

4.The most recently accessed program location will be displayed.

5.If a different program location is preferred, press

SKIP BACKWARD / SKIP FORWARD to move to the desired preset number (1-32).

6.Press PROG•SET to store the selected frequency at that preset.

Playing a Tape

Tip: You can play a tape from either deck.

1.	Press SOURCE repeatedly to select TAPE.
2.	Press STOP/EJECT to open the cassette door.
3.	Insert a tape into the door and push the door
	closed.
4.	Press REWIND/FAST FORWARD to position the
	tape to the desired starting position. (Deck 1

From CD

1.Insert a tape into deck 1.

2.Press SOURCE repeatedly to select CD.

3.Insert the disc(s) to be recorded.

4.Select the track, CD, or program to be recorded.

5.Press RECORD to begin recording when CD begins to play.

6.Press STOP to end recording.

Tape to Tape

	Suppressing Stereo Signal
PR:01
	Press FM ST. to toggle between FM mono and stereo
	for stereo FM stations. (Remote Only)

Only)

5. Press PLAY to begin playback.

1.Insert the destination tape in deck 1.

2.Insert the source tape into deck 2.

3.Press PAUSE and then RECORD on deck 1.

4.Press PLAY on deck 2. The playback and recording start simultaneously.

8 9