Chapter 1

SpeedTouch™120g Installation

1.2 SpeedTouch™120g Installation

System Requirements Before you install the SpeedTouch™120g, check your system for the following: A computer with a USB port

To obtain maximum wireless networking speed, a USB v2.0 port is needed.

Microsoft Windows 98 SE/Me/2000/XP

You may need your Windows installation CD during driver and utility installation.

A minimum of 1.5 MB of free disk space for installing the driver and utility program

Installation procedure

Do not connect your wireless device to your PC until you are instructed to ! do so by the InstallShield wizard.

Proceed as follows:

1Insert the SpeedTouch™ Setup CD-ROM in your computer’s CD-ROM drive. The SpeedTouch™ CD Browser will start automatically.

If the SpeedTouch™ CD Browser window does not appear automatically, click Run on the Start menu and enter the following path: D:\Menu.exe where D stands for the drive letter of your CD-ROM drive.

2The Choose Language window prompts you to select a language:

Select your language and click OK.

3The SpeedTouch™ CD Browser menu appears:

E-DOC-CTC-20040401-0002 v3.0

Click Install my SpeedTouch™.

9

Page 11
Image 11
RCA 120g manual Installation procedure