Connections & Setup
Explanation of Jacks
This section describes the jacks you can use to make connections. There are several ways to connect components to your TV.
TV ANT Lets you connect a coaxial cable to receive the signal from the antenna, cable, cable box, or if using the example on page 4, a VCR.
EXT Alert Guard ANT Lets you connect an antenna if you need to receive a stronger signal for the Alert Guard feature. Go to page 8 for more information.
R | L/MONO | |
AUDIO | VIDEO | |
R AUDIO L/MONO VIDEO
Pr Pb Y
Y 
L
Pb 
AUDIO
R
Pr 
VIDEO 1
VIDEO 2
VIDEO 3
VIDEO 1
VIDEO, AUDIO R and L/MONO INPUTS Lets you connect a component such as a VCR, DVD player, or laserdisc player.
¥R (RIGHT) AUDIO Provides right audio connection. The right audio connector is usually red.
¥L/MONO AUDIO Provides left audio connection. The left audio connector is usually white.
¥VIDEO Provides composite video connection. The video connector is usually yellow.
¥
VIDEO 2
VIDEO, AUDIO R and L/MONO and Y, Pb, Pr INPUTS Lets you connect a component video source, such as a DVD player.
¥Y, Pb, Pr Provides optimum picture quality because the video is separated into three signals. Use three video- grade cables for the connection. When using VIDEO 2 Y, Pb, Pr, make sure to also connect left and right audio cables to the VIDEO 2 AUDIO Input jacks.
¥ R and L/MONO AUDIO and VIDEO | Their description is |
the same as VIDEO 1 above. |
|
VIDEO 3 |
|
R and L AUDIO and Y, Pb, Pr INPUTS | Lets you connect a |
second component video source, such as a DVD player. Their description is the same as VIDEO 2 above. When using VIDEO 3 Y, Pb, Pr, make sure to also connect the left and right audio cables to the VIDEO 3 AUDIO Input jacks.
Chapter 1 | Graphics contained within this publication are for representation only. | 5 |
