RCA 29292 manual Powering UP, No Worry Battery Backup

POWERING UP

“NO WORRY” BATTERY BACKUP

This clock phone is equipped with a memory holding system that can be powered with a customer-installed 9-volt alkaline battery (not included).

When power is interrupted, or AC line cord is unplugged, the battery will power the clock to keep track of time and alarm settings programmed into memory. When on battery power, the digital display will not light; however, should wake time occur during the power interruption, the alarm will sound if remaining battery power is adequate. Normal operation will resume after AC power is restored.

Install battery as follows:

1.Remove the battery cover located on the bottom of the base.

2.Connect a fresh 9-volt alkaline battery (not included). The large and small contacts on the battery clip and the battery will interlock. Once connected, place the battery inside the battery compartment.

3.Replace the battery cover.

Battery compartment

	-	+	Battery clip
Battery	-	+

6