2 SpeedTouch™ Installation
E-SIT-CTC-20030702-0003v4.0 25
If you want to connect to the Internet via:
•An RFC1483 connection your connection is installed and ready for use. The
SpeedTouch™ is now prepared for connecting you to the Internet (See
“3.2 Internet Sessions via an RFC1483 Bridged Connection” on page 36).
•A PPP connection some additional configuration is required (see below).
PPP configuration If you are installing a PPP connection some additional configuration is required.
Proceed as follows:
1On the Apple menu click System Preferences.
2The System Preferences window appears. Click the Network icon.
3The Network window appears:
Make sure SpeedTouch™ USB is selected in the Show list and click the TCP/IP tab
to view TCP/IP settings for the SpeedTouch™ network connection.
Make sure Using PPP is selected in the Configure list.
4Click the PPP tab to view the PPP configuration:
Enter your Account Name and Password in the appropriate fields.
Note Select Save password in case you want the computer to remember the
password for this account name.
Optionally you can enter a name for this connection in the Service
Provider field. All other fields may stay empty
5If your computer runs:
•Mac OS X v10.1 or v10.2:
You must enter a digit, e.g. 0, into the Telephone Number field.
•Mac OS X v10.3:
You mu st le ave th e Telephone Number field empty.
6Click the Proxies tab to view the proxy settings. By default all fields are empty, i.e.
no proxies are used. As this suits the required SpeedTouch™ configuration, no
changes are needed in this panel.