RCA SA-155, 31-5000, 811082210B, 01A02 owner manual Operation

OPERATION

1. Turn VOLUME to MIN.			•	Do not listen at extremely high
				volume levels. Extended high-
				volume listening can lead to
				permanent hearing loss.
			•	Once you set the volume, do not
				increase it. Over time, your ears
				adapt to the volume level, so a
				volume level that does not cause
				discomfort might still damage your
2. Press POWER. The red indicator lights.				hearing.
			Note: The amplifier mutes the speakers
			when you connect headphones. If you
			want to listen through the speakers
			again, unplug the headphones.
			6. Start the sound source.
			7. Adjust VOLUME, TONE, and
			BALANCE as desired.
3. Set TUNER CD/TAPE PHONO to the			8. When you finish using the amplifier,
			press POWER. The indicator turns off.
	source you want to listen to or record
	from.
4. If the sound source is monaural, press
	in MONO. If the sound source is stereo,
	leave the button in the out position.
	Note: The mono button setting also
	affects tape recording.
5. For private listening, connect a
	headphone’s 1/8-inch mini plug into the
	amplifier’s PHONES jack.
	Caution: To protect your hearing,
	follow these guidelines when you use
	headphones:
	• Set the volume to the lowest setting
		before you begin listening . After you
		begin listening, adjust the volume to
		a comfortable level.

5