RCA 01A02, 31-5000, 811082210B, SA-155 owner manual Troubleshooting, Problem, Solution

TROUBLESHOOTING

If you have a problem with the amplifier, first be sure all connections are correct and secure. If the problem continues, check the following troubleshooting information for a solution.

Problem	Solution
No sound from	Headphones are connected to the amplifier. Unplug the headphones.
the speakers
	The source selector is set to the wrong audio source. Set the selector to
	the correct source.
	VOLUME is set too low. Turn VOLUME clockwise.
	If you connect a CD or tape player to the back panel and another to
	the front panel, the back panel jacks are disabled. Disconnect the
	player from the front panel jacks.
No stereo sound	MONO is pressed in. Press MONO to the out position.
	BALANCE is set all the way to one side. Adjust the control.
	The speaker connections are incorrect. Turn off the amplifier and
	correct the connections.
Distorted or	VOLUME is set too high or too low.
weak sound
	The speaker connections are incorrect. Turn off the amplifier and
	correct the connections.
	The MAG/CER setting is incorrect. Set it to the correct position.
	MONO is pressed in while you listen to a stereo source. Press MONO
	to the out position.
Cannot record	The connections between the tape deck and the amplifier’s L and R
	TAPE OUT jacks are incorrect or loose. Turn off the amplifier and
	correct the connections.
	The source selector is set to the wrong audio source. Set the selector to
	the source you want to record.
	If you connect a CD or tape player to the back panel and another to
	the front panel, the back panel jacks are disabled. Disconnect the
	player from the front panel jacks.

This amplifier has been manufactured to the specifications of RadioShack and is covered by a limited warranty from RadioShack. If your amplifier is not operating as it should, take it to your local RadioShack store or call 1-800-THE-SHACK for assistance.

6