RCA 32v434t, 32V524T manual Explanation of Jacks, Connections & Setup, Chapter

Connections & Setup

Explanation of Jacks

This section describes the jacks you can use to make connections. There are several combinations available to connect devices to your TV.

ANTENNA/CABLE DIGITAL INPUT

ANTENNA/CABLE ANALOG INPUT

VIDEO IN

VIDEO IN

DIGITAL INPUT Lets you connect a coaxial (RF) cable to receive digital programming through your cable provider. Receive off-air digital programming via an antenna. Refer to page 5 for more details.

ANALOG INPUT Lets you connect a coaxial (RF) cable to receive analog programming through your cable provider. Receive off-air programming via an antenna. Refer to page 5 for more details.

Use the ANTENNA button to toggle between these RF inputs.

VIDEO IN Lets you connect devices which have Audio/Video (composite) outputs such as VCRs, DVD players, satellite receivers, cable boxes, camcorders and video game consoles. Connect the left and right audio jacks for sound.

•VIDEO Provides composite video connection. The video connector is usually yellow.

•AUDIO-LProvides left audio connection. The left audio connector is usually white.

•AUDIO-RProvides right audio connection. The right audio connector is usually red.

To access the device when using these jacks, use the INPUT button on your remote until VID1 appears.

Y, Pb, Pr Lets you connect devices which have component (Y Pb Pr) outputs such as VCRs, DVD players, DVD-PVRs, DVD recorders, satellite receivers and cable boxes. This connection provides optimum picture quality because the video is separated into three signals. Use the VIDEO IN left and right audio jacks to connect for sound.

To access the device when using these jacks, use the INPUT button on your remote until CVID appears.

Refer to page 7 for a detailed explanation of how to connect Y Pb Pr cables to your TV.

Continues on next page...

Chapter 1 15